The Palace Chicken Coop: Free Chicken Coop Plan


Hey guys! It’s Scott’s (my husband…otherwise known as the “.com” of Steamy Kitchen) first post! ~Jaden

When Jaden brought home 5 fluffy new friends in July of last year, I knew a chicken coop was in our future. I wanted to design and build it myself as a fun exciting project. Little did I realize that 5 months go by very quickly when you move into a new house! When November 1st popped up on the calender, we had less than 2 months before we were expecting fresh eggs for breakfast.

When I first started doing research on our new coop I spent a great deal of time on Back Yard Chickens looking for ideas and suggestions. We owe a great deal of credit to the people who were willing to share their coop photos. All of them gave me tips, ideas and inspiration. We are grateful for their willingness to share their passion and work. Our girls would not have such a lovely home if it were not for the sharing of these people!

In that spirit, I wanted to create a pictorial showing how we made our coop. If you have any questions on how something was done, please ask and I will try to answer to the best of my ability.

 


Free Chicken Coop Plan for The Palace

Design Phase

We wanted to make sure our coop met the following requirements:

  1. It had to be aesthetically appealing as it would be highly visible.
  2. Easy cleaning and maintenance (including being able to stand inside & have easy access to clean coop).
  3. Sturdy to handle those occasional tropical storm conditions here in Florida.
  4. Designed to use Deep Litter Method in coop and run.
  5. Resistant to Summer Rain Flooding that occurs in that part of the yard.
  6. Good ventilation and air movement.
  7. With adequate room for 5-7 hens (I figured we would be adding one or two later wink.png).

I probably spent the better part of two weeks of late night web surfing to gather ideas and develop a plan of attack. I checked, double checked and cross referenced everything from space per bird requirements, Deep Litter Method (DLM), nesting box sizes, roost length, building codes, roofing solutions, predator proofing, waterproofing, drainage ideas, working with concrete, to using explosive nailers. I must admit the internet is a wonderful tool.

At this point I would like to add my *** Disclaimer ***: I am not, nor have I ever been an architect nor structural engineer. The plans and designs I created are from my understandings of things required to meet the objectives of my coop. They have not been approved by a certified engineer to meet certain hurricane, earthquake, volcanic, flooding, nuclear blast or other natural disaster sized forces. While every effort to make a safe environment for our chickens, some things may have been overlooked as we are novice chicken coop builders. Please note that no chicken was harmed during the making of this coop and all testing was done in very controlled manner were no chicken was ever placed in danger. 

I spent a fair amount of time looking for plans online. It seemed I was unable to located any free plans that seemed to meet what we needed. So I decided to use Google’s 3D modelling tool SketchUp to create a working model for our coop. It allowed me to spin the diagram in any direction and adjust it as I saw fit. It did take a while to get used to it, but the time spent in the learning curve was more than worth it during the construction phase. I can send you two files from SketchUp with the plans for the coop if you are interested. The first is the rough framing, while the second is the finished framing after the hardware cloth is installed. Please leave a comment or send me a private message and I will email them to you.

 

Click here for a zip file containing the SketchUp plans

You must download and install Google’s SketchUp program for these files to work. Google SketchUp is a free program that you can download (make sure you download the correct file for your operation system (Mac or Windows).

 

Designing the Chicken Coop

 

I decided on the following features for our coop:

  • 5 – 7 egg laying hens (standard size)
  • 10 sq ft of run space per bird
  • 3 sq ft of coop space per bird
  • 1 ft of roost rail per bird
  • 1 nesting box per 3 birds
  • sloped coop and nesting box floors for water drainage during clean outs
  • sloped metal over wood roof that added stability as well as way to gather rain water.
  • minimum 6 ft height so I could stand up inside.
  • strength of construction to ensure durability and stability
  • easy access doors for cleaning as well as egg harvesting
  • raised foundation to help prevent flooding
  • 1/2″ hardware cloth used for screening

 

The entire structure is 12 ft by 6 ft. The coop measures 4 ft by 6 ft. The roof has a 1 ft overhang on all sides which gives us a 14 ft by 8 ft roof. The coop floor is approximately 30 inches above the run floor.

 


Chicken Coop Foundation Phase

One of the biggest concerns I had was dealing with the potential flooding of the area surrounding the chicken coop. This past summer we had so much rain that the ground in the area became completely saturated. The ground was like a sponge and when you walked on it, you would sink an inch and water would flow around your boots. There was a concrete pad already poured where we wanted to build the coop, but we wanted to use that for a future shed or work area for the garden that is part of the same area. I made the decision to pour a footer attached to the existing pad to build the coop up on. This would raise the coop about 6 inches higher leaving room for drainage, even if the ground became completely saturated again.

It’s important during this step to make sure everything is square and level. After framing the footer I added rebar and drainage stones to help facilitate water flowing out of the chicken coop.

I mixed and poured the concrete using a mixer rented from Home Depot. If you’re wondering, the footer was 6 feet wide by 12 feet long and 6 inches across. The 24 linear feet took over 1/2 ton of concrete. Mix it with a mixer, or better yet, call a concrete company and have them deliver your required concrete premixed. Your back will thank you!

When I went to remove the forms, I noticed this in the concrete.

It seems Jaden let the chickens out some time after I poured the cement before it had cured sufficiently. I found the guilty party not to far away with her concrete shoes. Even to this day she is claiming her innocence and blames it on Chicken Little.

Before I poured the concrete I had inserted a four foot section pvc pipe on the lowest part of the coop. I cut, drilled and assembled pvc pipe to act as a drain if a sever downpour occurred. The holes are about 2 inches apart.

Another view of drainage system.

I ordered a 1/2 cubic yard of gravel and a cubic yard of sand from a local aggregate company. They were kind enough to deliver it right to my driveway much cheaper than buying a huge number of bags at the local home improvement store (not to mention the numerous trips it would have taken to carry the weight). I used the gravel to build up the floor of the coop. Later it will be covered with weed prevention cloth and then the sand will be added. This put the “floor” of the coop at least six inches higher than the surrounding ground. Hopefully this will keep the ladies’ feet dry.

 


Chicken Coop Framing Phase

Framing was new to me. I had a general idea on how things were supposed to go, but no real framing experience. I did spend some time looking for nailing requirements and and how best to secure the coop to the foundation. During this research I came across a great deal of information on basic framing. I printed out images from the sketch-up and used them as a reference to cut all of the framing pieces. After cutting, the family pitched in to help pre-stain all the pieces. We used a good water sealant stain and made sure we had good coverage on all the pieces, especially the ones that would have direct contact with the concrete.

I was fortunate enough to have family help stain the wood.

The process of cutting and staining all the pieces took much longer than anticipated. Painting or staining after assembly might have been easier and faster. Might be something to consider.

Framing took several days. Keep in mind if you are working by yourself use numerous clamps and braces to keep everything where it is supposed to be.

After getting the initial walls and roof beams up, I used a powder activated nailer to secure the kick plates to the concrete putting a fastener about every foot. Probably more than I needed, but I was enjoying the process so a few extra fasteners never hurt. I had to vary the loads of powder if I was nailing into the concrete pad or the footer.

And another view from the opposite side. From this angle it is a little easier to see the coop floor is tilted towards the side where the door will go.

I cut the coop floor from plywood and then started installing the 1/2″ hardware cloth.

It’s a pretty straight forward job of measuring, cutting and then installing the hardware cloth. I used an automatic stapler to secure the cloth to the framing. Later it will be sandwiched between the framing and the finish framing piece. An automatic staple gun is an absolute must during this phase.

I then installed the finish framing pieces that were designed to hold the cloth in place.

These pieces help secure the cloth on the inside of the coop.

I also installed the roof sheathing at this time to help keep some of the rain out. I left some of the finish framing pieces off till after installing the walls.

 

Framed out where the hen door was going.

And also the nesting boxes. The boxes themselves measure about 14 inches across, 16 inches tall and 12 inches deep. You can’t tell from the picture, but the floor of the nesting boxes is tilted towards the coop so water will flow out when cleaning. Notice the gap between floor of nesting box and the retaining board. You can also see the sloped coop floor pretty well in this picture. Also note that the nesting boxes are up about 6 inches off the floor to allow for the DLM.


Chicken Coop General Construction Phase

I picked up some very inexpensive vinyl flooring tiles from the local home improvement store. They were quick and easy to install and hopefully will help when cleaning out the coop.

Here is a picture of the removable stopper blocks.

And with them removed as if we were cleaning the coop out.

Built and mounted the main access door.

Other side of door.

I also built the access ramp.

It is secured using four eye bolts. The two on the bottom of the ramp have been cut using a hack saw to make hooks. The ramp can be removed and washed off with a hose. I didn’t install this till after I had the walls up on the coop, but I wanted to show it to you here.

 


Building the Coop Phase

The coop walls are built with simple siding sheets found at Lowes. They are shiplap boards that have an overlapping edge on them. I decided to build the panel, install them on the coop, trim and then stain the boards. Most of the trim pieces are 1 x 4 strip. I choose the strip over the normal 1 x 4 boards because they were much cheaper and already had the rounded edge. Surprisingly the strip boards actually had very few knots and were fairly straight. I had to cut two of the finish framing pieces to install the ventilation and siding above the coop door. I had forgotten the roof would hang down and interfere with the door opening. Using a skill saw set at the appropriate depth this wasn’t a major issue.

I also secured a 2×4 to act as my door stop as well as my support for the siding. The ventilation holes were created using a 2″ hole saw and covered with 1/2″ hardware cloth.

Next, I built the coop door and trimmed it.

Here is a close up of the back of the door showing the hardware cloth sandwiched between siding and trim pieces.

Then installed it on the coop.

Then the same process for the rest of the sides.

Back coop wall installed.

Nesting box side.

Chicken ramp side wall.

Stained inside and out. Seems Nathan decided he liked to pretend he was a hen checking out the new coop.

Built the nesting box cover out of siding and some trim pieces I had laying around. I used an extra trim piece that will attach to the wall to create an overhang. Hopefully this will help reduce or eliminate water leaking into the coop from the nesting boxes. I will also put weather sealing around the rim to help make it water tight. There is also a lip on the bottom of the siding around the nesting boxes, but it might be hard to see in this picture.

Installed the missing finish framing pieces under the coop. This is a good view of where the concrete pad and footing are connected. Using the pre-existing pad helped reduce the amount of concrete in this project. The coop height also gives the chicken’s adequate headroom.

 


Chicken Coop Run Floor Phase

I put weed block cloth down to prevent weeds from growing up through the floor and more importantly, preventing the sand from washing down through the rocks. It will also allow water to seep through into the drainage system.

Put sand around the edges to hold it in place.

Then I moved this cubic yard of sand…

Into the coop. In the end I think I ended up with a little less than 6 inches of base sand on top of a four inch rock base.

 


Chicken Coop Roof Phase

Built and painted the gutter. At fourteen feet, the gutter was going to be multiple pieces. It was pretty straight forward as far as assembly goes, but it did give me reason to pick up a pop-rivet tool. I always enjoy picking up new tools! big_smile.png

Installed it on the edge of the coop. I debated about building wedges to make the gutter parallel with the ground, but decided the 10 degree difference between roof and ground could be accounted for in the mounting. When I mounted the gutter to the coop I realized the lower end would be below the drip edge from the roof. I cut a piece of aluminum from the unused portion of gutter and painted it. It was installed overlapping the back of the gutter but will be under the drip edge from the roof.

Then I papered the roof and put down the 1×4 stripping to give breathing room.

Following a suggestion from this post on how to install a metal roof, I laid the metal roof out on the lawn to determine where the ribs would be in comparison to where the edge would be. I trimmed the roof on both side edges to ensure I would not have a rib where the edging would be.

Then installed the roofing on the coop. If you have never installed any type of roofing, plan for some extra time in this step. Be careful and think safety. Winds can be dangerous when handling these large metal sheets and the edges are very sharp.

 


Chicken Coop Finishing Details

The final stretch was finishing the nesting boxes and installing the roost bar. The chickens seemed to enjoy the temporary bar I was using for their roost, so I rounded the edges a little and left it unstained. No real reason why, I just liked it that way. I also think it was easier for the chickens to see. Seems they were having trouble accurately judging a stained one I had in there during hours of low light.

 

I used some trim pieces to give the nesting boxes a little more cozy feel. I am pretty sure the girls didn’t care one way or the other, but I like the look of them with the trim in place.

Here’s a view from the outside showing the trim pieces. My wife and kids added the fake wooden eggs to give the girls a hint of what they are supposed to do and where to do it.

Built and installed the coop door. The rope is pulled from the front to open the door and is hooked on to a cleat to keep it open. We leave it open most of the time, closing it during very windy  or cold nights. I used some furniture slides on the door inside the track to help it move easily.

Close up of the door. When the door is closed it does extend a bit below the door opening to help prevent little racoon fingers from trying to open the door (in theory at least).

Here is the cleat for holding the door open.

We also hung a little child’s rake on the outside and use this to help turn under the poop or spread new wood chips in the coop. Very handy!

We moved the girls in and they seem very happy.

You can read about our first egg-perience here: Our First Egg.

And here is one of the recipes she used our fresh eggs in: Crepes with Salted Lemon Butter Caramel.

 


Lessons Learned from Building Chicken Coop

  1. Double check length of your lumber, especially the longer pieces. The 12 foot and 14 foot pieces I got from the store were longer by almost two inches. Without catching this, the coop would not have fit on the footer.
  2. When squaring the footer use either the 3-4-5 triangle method or diagonal corner method. Both of these methods assume that your opposite sides are equal in length for the rectangle to be square.
  3. Getting help framing is always nice. Having an extra pair of hands makes holding things in place much easier. If you are going it alone, then don’t hesitating in generous use of clamps and temporary alignment guides.
  4. The chicken coop ramp’s rungs are made of 1×2 on 6 inch centers. The girls seem to skate down between rungs, maybe a little closer together would have been better. They don’t seem to mind and go in and out the coop all the time. I’ll keep an eye on this to see if it becomes an issue. If you are moving your chickens when they are smaller, then build a ramp with closer rungs. After they mature you can swap out the ramps.
  5. I did add a removable board across the coop door to hold the shavings in when we open the door. It’s held in place by a piece of 1×2 on each side of the coop and it slides up for removal.
  6. Don’t think that because someone works at a big box home supply store they know everything you need. I ran into issues when ordering the roof for the coop. I went in and asked their special projects desk person for assistance in ordering everything I needed for an 8 x 14 foot metal roof. After I picked up all the parts I went online to the manufactures web site to see if they had any special instructions. After finding their installation guide, I quickly realized I was missing half the parts required to complete the roof they way I had explained it to the salesperson. It’s better to take some time and research exactly what you will need before you go to the store than it is having to wait 2 more weeks to get the rest of the parts delivered.
  7. Pre-drilling holes for nails and screws makes things much easier when you are working on top of a ladder.
  8. If you have young children like we do who want to collect eggs from the nesting boxes, then top opening boxes may not be the best bet. We had to put a step stool out by the coop so the kids could open the boxes and reach the eggs. I wouldn’t lower the boxes any, but I might consider making a back door instead of the top opening. Just a thought.
  9. I love the slanting floors of the nesting boxes and the coop. Remember to factor that slope in when building your walls. Double check all your measurements and calculations. Also installing the walls is another great time to ask for a little assistance.

 

I’m really happy how things are going so far. I’ll keep you posted as we progress.

 

Free Chicken Coop Plan: Download the Google SketchUp Files

Click here for a zip file containing the SketchUp plans

You must download and install Google’s SketchUp program for these files to work. Google SketchUp is a free program that you can download (make sure you download the correct file for your operation system (Mac or Windows).

Comments 242

  1. Jessica DeVore

    I love your coop, though it is much more elegant than I am ready to build. However, the framing is perfect. Could you give me your actual dimensions? Or material list for just the frame?

    1. bashir shah

      hy , i love your coop want to build like ur plz send me copy of paln thanks
      regard
      bashir shah

  2. Pamela Hernandez

    Hi there! i have been looking at your coop for an hour now and have been searching along with my husband for the perfect one! we found it! I am having a problem downloading your plans and wondered if you could email them to me along with your lumber list? Thank you in advance! We are in Florida too! South Florida. :)

  3. Pam Hernandez

    Hi! I love the coop and have been looking for the perfect one for some time. I am not able to download the plans from the link above And wondered if you are willing to share your coop plans and lumber list?
    Thank you
    Pam

  4. Carrie Yambrick

    Hi, I too have been searching for the perfect chicken coop for my Grandaughters chicks and I have finally found it! Your coop is not only visually attractive it appears to be very well constructed. I am having trouble downloading your plans and am wondering if you could email me the coop plans along with a lumber list?
    Thanks!
    Carrie

  5. Stacy Barnes

    Hello, I love the coop! It’s appears to be very well designed and constructed. I, though, am also having difficulty downloading and opening the plans. Would you mind emailing me the plans and a materials list, if you have one? Thank you!!

  6. Brendan

    We have been looking for a set a of plans for a chicken coop. This one is one we have agreed. We like the most. Could you email us a set of plans and materials list?

  7. Allen King

    This is exactly the kind of coop and run I have been looking for, I would love to also have a copy of the plans and material list if possible.

  8. Graham Bailey

    Gudday, I love the coop. It’s very well designed and constructed. Just what we are looking for. I am also having difficulty downloading and opening the plans. Would you mind emailing me the plans and a materials list.

    Regards, Graham.

  9. Janet Picone

    I would like to get a materials list if one exists. I’m going to bribe my DH (a carpenter) to build this coop for me and my girls! :)

    1. Gina Cattell

      I would love to have the plans for your chicken coop.
      Thank you,
      Gina Cattell

  10. Jim

    Jaden/Scott

    Could you send me your plans; I am in the process of building (from you pictures..not quite as easy as thought); Plans would be a life send!! Thank You!!!!

  11. Nathan Fehler

    I will be starting on this coop probably this weekend! I am not a novice builder but not an expert either. Would you mind emailing me the plans and anything else helpful you may have as well please? That would be great! Thanks – Nate

  12. HB Hebdon

    I love this coop!! This is exactly what we wanted. Can you email me the plans as well? I tried to open the zip but it is not working. Do I need the program you used to see the plans? Also, does it include a supply list of lumber and parts? And do you have an estimate of how much it cost? Thank you so much!! Love it!!

    1. SteamyKitchen

      I sent them! It cost about $1,500 but that number could be so much lower if you used recycled lumber and no metal roof (use shingles instead)
      The metal roof alone was $800.
      Concrete rock and sand was $350 – you don’t necessarily need concrete- we needed it because that are of the yard tends to flood and we had to raise the floor.

      Without the concrete and metal roof you could make this coop for $600.

  13. HB Hebdon

    We love your coop! We have been looking for one just like it. Can you email me the plans and a list of your lumber supplies? Also, an estimate of how much it may cost? Thank you so much!!!

  14. Nadine VanLeuvan

    Jaden, I love the design of this coop after scouring the internet for a design that had what I was looking for. Our babies arent quite ready to be put outside yet but I would like to get started on ordering materials and gathering supplies together. To this end would it be possible for you send me a pdf file of the plans to the above email address? A list of materials would also be great if you have one. Thanks so much for taking the time to help us out!

  15. Paul

    Great stuff! So many wonderful features. Could you please send me some plans and materials list?
    Thanks!
    Paul

  16. David Longley

    Awesome! Could you send me the plans please?

    Regards,
    David
    [email protected]

  17. Debbi smirnoff

    Please send me the plans to this gorgeous chicken coop! I have looked everywhere for something practical, easy to clean and beautiful! Ths is it! Thx

  18. Alaina Bradshaw

    Could you please send me the plans to this gorgeous chicken coop! I have looked everywhere for something like this. It is practical easy to clean and beautiful. My brother-in-law is going to build it so any tips you might have would be greatly appreciated. Thanks so much!!! :)

  19. Erna Shull

    Beautiful job! would u please send me the plans vis email. My girls will luv this! Thx…

  20. Oli Rusu

    I would absolutely LOVE the plans for this. I really plan to do this next week! Thank you SO SO much for this! You rock!!!

  21. Melissa zaugg

    I LOVE this coop! I would like to get started this weekend if i can… I would be so grateful if you could send me the plans and materials list…. You guys did such a beautiful job!! :) SO excited to make the girls a new home!

  22. Bill Sands

    Thanks for taking the time. I used to have chickens before I tore the barn down to build a wood shop. I miss the goats and chickens. Not enough room for a goat barn now, but your chicken coop will fit in nicely. Yours is the best design of all that I have looked at. It is also pleasing to the eye. The SketchUp plans are a real help as well. I use SketchUp in the shop. Thanks again

    Regards,
    Bill

  23. Cody Vigil

    I love this design. It is very well thought out and constructed. My wife saw this and decided right away that we needed chickens and that I needed to build this. The chics will be arriving the week of July 15th. If you could email me the plans that would be a huge help. I tried the downloaded zip file but had no success with opening them. Thank you for posting the pics and sharing your story.

  24. Pingback: Ways to Choose the Best Hen Coop Plans on Your Project | Top Poultry Pen Plans from the Internet

  25. James Trisler

    Ditto…loved the whole thing. Could not get link on website for plans to work.
    Could you also send the plans- bill of materials?

    Jim

  26. Christina Sergy

    Hello,

    What a wonderful coop! You did an amazing job. I’d love to get a copy of the plans too if possible. : )

    Thanks so much,

    Christina Sergy, Long Beach, CA

      1. John Gutschenritter

        Hello there i went through and looked at this coop. I have an organic farm and would like to add chickens. Would it be possible for you to be able to send me a copy of those plans with material costs and dimentions etc…I would love to build one on the farm for chickens. Thanks John

  27. Quincy Draper

    Hi, I really love your coop, i’ve been looking for coop designs for two days and i finally found it. I see where you have emailed the schematics and lumber list to other chicken enthusiasts, If you could extend the same favor to me i will be very gracious. Thank you very much.

  28. jenxanders

    could we have a copy of your plans! this is exactly what we are trying to build…. our current coop is too small ( we were newbees and obviously have different thoughts than the person we got info from ) thank you

  29. Susan PARKS

    I have been searching along with my husband for the perfect oneand found it! I am having a problem downloading your plans and wondered if you could email them to me along with your material list ?

    Thank you in advance!

  30. Danny Bryant

    Nice work! It really shows that you put a lot of time and effort into The Palace. I’d really like a copy of your design. Thanks for sharing…

  31. Luiza

    Hi your coop is GREAT, it’s the only one we love. Can you please send me the lumber list and plans. We weren’t able to open your plans. Looking forward to building this great coop for our chickies. :)

  32. Brandon

    Cool plans and very nice article. I’ve been trying t get a feel for the scope of the project and this painted a very nice picture. Would you be so kind as to email me the plans and material list?

  33. Bill Pofahl

    I got the plans some time ago – was able to look at them using SketchUp. However, I didn’t see a materials list. Is that available separately? This is the best looking, most practical coop I’ve seen. I plan to make it my winter project so I can be ready for chickens in the Spring. Just need a materials list to help me figure out what I need to pay for the project. Thanks!

    Bill

  34. Cliff Genzler

    I am in the process of building a coop and discovered your plans. Unfortunately I was unable to download the plans and would appreciate any help you can give me. Thanks

  35. Scott

    I have added new download links at the top of the post. You should be able to save the SketchUp files from there.

  36. Amanda:)

    Hello,
    This is exactly what I have been looking for! :) This is beautiful and I hope to be able to recreate here in MN. The detailed photos and descriptions of your experience will be a great help when we begin to build our coop. Can you please email me the plans and materials list too?
    Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *